1941 Remontoire Constant Force
The Grönefeld 1941 Remontoire features an eight seconds constant force mechanism, ensuring the force serving the balance wheel does not wane.
From the mainspring being fully wound to the last minute of the 35 hours of power reserve, when the stop works intervenes, the force never fluctuates. The result is that the amplitude and rate remain consistent, leading to superior precision.
The time-consuming creation of each movement means that production will be limited to only 188 Remontoire movements, each with its own unique serial number, offered in a choice of case material and dial variants.
After the launch in 2016 the 1941 Remontoire has been awarded 5 times! In November 2016 Grönefeld won again the prestigious Grand Prix d'Horlogerie de Genève award. This time the prize they’ve won was for the best watch in the “Mens Watch” category.
A movement for purists
From the outset, Bart and Tim always envisaged the Grönefeld 1941 Remontoire as a watch intended to appeal to the most discerning of watch collectors. It was therefore imperative that the movement was befitting of such a timepiece, appealing to the exacting requirements of purists. The stainless steel bridges replicate the facades of the Dutch houses, termed 'bell gables' and reference the homeland of the Horological Brothers, Bart and Tim. The bridges are hand-beveled, evincing a brilliant gleam, while the centres deliver a sublime contrast with their micro-blasted surfaces, adorned with relief engraving.
The new 5-arm, double spoke gear train wheels exhibit a contemporary character, but their circular grained surfaces pay due reverence to fine watchmaking tradition. The movement includes a balance wheel with white gold timing screws and is equipped with a free-sprung over-coil hairspring with triangular stud. Gold chatons stand testament to the no-compromise specification of this movement whilst mirror polished screws feature chamfered rims and slots. Numerous surfaces glisten, courtesy of mirror-polishing which has been patiently executed by time-served hands. The inventory of different surface decorations will sate the desires of any purist and include snailed, grained, spotted and frosted surfaces.
With so much beauty harnessed within the Grönefeld 1941 Remontoire it only seemed appropriate to share the movement with wearers, equipping the timepiece with a sapphire case back.
There’s a tremendous amount of manual labour involved in building a 1941 Remontoire. Just the finishing, assembly and adjustments require at least 220 hours of full concentration.
The time-consuming creation of each movement means that production will be limited to only 188 Remontoire movements, each with its own unique serial number, offered in a choice of case materials and dial variants.

technical specifications
Calibre
G-05
Movement dimensions
Diameter: 32,0 mm
Thickness: 5,5 mm
Number of parts
258 parts
Power reserve
35 hours with constant force (stop system)
Number of jewels
36 jewels, partially set in solid gold chatons
Remontoire
To optimize time keeping a small hairspring is wound every 8 seconds to guarantee a constant force for the escapement. A complex satellite gearing mechanism with hypocycloidal gears, twin ball bearings, pinions and jewelled levers, achieve this.
Balance wheel
Variable-inertia balance wheel with four white gold timing screws (diameter 10 mm)
Frequency
21.600 vibrations/hour
Balance spring
Free sprung with Phillips terminal over coil curve with triangle hairspring stud
Escapement
Jewelled Swiss lever
Main Plate
Spotted and ruthenium electroplated brass main plate
Bridges
Stainless steel, bevels polished by hand, micro-blasted centre
Circular grain on the top to highlight the bridges shapes and engravings
Relief engraved Grönefeld logo, number of jewels and eight seconds remontoire
Hacking seconds
In setting mode the hacking seconds mechanism will be activated
Displays
Central Hours and Minutes
Small Seconds at 6 o’clock
Governor speed regulator at 9 o’clock
Case dimensions
Diameter: 39,5 mm
Thickness: 10,5 mm
Water resistance
3 atmospheres – 30 meters – 100 feet
Material
White Gold Au750/Pd210 (Non Rhodium plated) or Red Gold Au750 5N
Engraving: Grönefeld and the individual number
Crown
Case matching material, engraved with The Horological Brothers logo
Dial
Sterling Silver 925, frosted and satin-grained surfaces
Hands
Extended Lancette hands. Flame-blued steel and mirror polished centres. Small poised seconds hand
Strap
Hand-sewn aligator leather. 20mm-18mm
Buckle
Pin buckle made in White Gold Au750/Pd210 (non rhodium plated) or Stainless Steel 916L engraved with Grönefeld. 18mm
Crystals
Domed sapphire crystal on the front with hard anti-reflective coating on both sides
Flat sapphire crystal on the back with hard anti-reflective coating on both sides
Number of components
66 parts
Total weight
Stainless Steel 74 Grams
Red Gold 97 Grams
White Gold 97 Grams















































































